The Apogee Electronics Symphony I/O Mk II Pro Tools Audio Interface with Special Edition 2x6 Analog I/O and 8x8 Digital I/O is an audio interface designed to deliver high-performance A/D and D/A conversion at up to 192 kHz for mixing and mastering engineers using Pro Tools HD systems in personal, project, and commercial studios. The included 2x6 SE I/O card features stunning dynamic range with low distortion and noise for mastering-grade sonic quality.
Its analog I/O includes two inputs on XLR 3-pin jacks and six outputs on a DB25 connector. Additional XLR, TOSLINK optical, and RCA coaxial jacks provide connectivity for AES/EBU, ADAT, and S/PDIF digital inputs and outputs. The chassis utilizes Mini-DigiLink connectivity for high-speed data transfer rates and compatibility with your Pro Tools HD hardware. Its front panel presents a TFT touchscreen display, multi-function control knob, and convenient 1/4" stereo headphone output.
The Apogee Electronics Symphony I/O Mk II Pro Tools Chassis is an audio interface chassis designed to provide direct connectivity to Pro Tools HD systems for recording and mixing engineers in broadcast, post-production, studio, and live stage applications. It features a Mini-DigiLink port in the pre-installed HD option card, BNC loop sync I/O, and BNC word clock I/O. A stereo 1/4" headphone jack enables quick and effective monitoring with a variety of headphone impedances.
Emulating an Avid HD I/O interface, it ensures seamless integration and sample-accurate delay compensation while delivering ultra-low latency for proper timing in signal conversion. Configure and control the chassis via the color touchscreen display and large rotary control on the front panel. Install multiple I/O cards (available separately) for up to thirty-two channels of analog inputs and outputs.
The Symphony I/O MkII is made in the USA and ships with a power cable.
- Pre-installed HD option card allows Mini-DigiLink connectivity to your Pro Tools HDX, HD Native, or Core/Accel system
- Emulates Avid HD I/O
- Ultra-low latency performance
- Sample-accurate delay compensation
- Stereo 1/4" headphone jack features Apogee's proprietary Constant Current Drive for smooth frequency response with any headphones
- Color touchscreen display
- Large front panel control for quick adjustment of selected parameter
- Supports multiple I/O cards for up to 32 channels of analog inputs and outputs
- BNC loop sync I/O for synchronizing multiple Pro Tools HD audio interfaces
- BNC word clock I/O for synchronizing external equipment
- Designed in California, made in the USA
Specifications:
- Form Factor: Rackmount
- Display: Touchscreen
- Channels of I/O: None
- Maximum Sampling Rate: 192 kHz / 24-Bit
- Number of Microphone Preamps: None
- Built-In Microphone: None
- Expansion Slots: None
- Pad: None
- High-Pass Filter: None
- Solo/Mute: None
- Analog Audio I/O: 1 x 1/4" TRS Headphone Output
- Phantom Power: None
- Digital Audio I/O: None
- Host Connection / USB: 1 x DigiLink Mini, 1 x USB-B
- Host Connection Protocol: Avid Proprietary
- USB (Non-Host): None
- Sync I/O: 1 x BNC Loop Sync Input, 1 x BNC Loop Sync Output
- 1 x BNC Word Clock Input, 1 x BNC Word Clock Output
- Network I/O: None
- MIDI I/O: None
- Wireless Connectivity: None
- Maximum Input Level A/D Converters: +24 dBu (+4 dBu) +6 dBu (-10 dBV)
- Impedance D/A Converters: 50 Ohms. THD+N -110 dB (+19 dBu Input, 600-Ohm Load) -101 dB (+14 dBu Input, 32-Ohm Load)
- Sample Rates: 192 kHz
- Sample Rate Conversion: None
- Bit Depths: 24-Bit
- Sync Sources: None
- Memory Card Slot: None
- OS Compatibility: macOS, Windows
- Included Software: None
- Compatible Software (Not Included): Any Core Audio (Mac) Compliant Software Pro Tools HD 9+
- Included Plug-Ins: None
- Supported Drivers/API & Plug-Ins: macOS Class-Compliant (No Driver Needed)
- Mobile Device Compatibility: None
- Power Requirements: AC/DC Power Adapter (Included)
- AC Input Power: 90 to 240 VAC, 50 / 60 Hz
- Power Consumption: 150 W
