Featuring a proprietary, hand-crafted capsule, the Blue Bluebird SL is a studio condenser microphone which builds upon its predecessor to provide a precise and clear sound as well as switchable filter and pad settings, ensuring great versatility for varied studio recording applications. It utilizes a large, gold-sputtered Mylar diaphragm, replete with a sculpted rear backplate to emphasize resonances at higher frequencies; this creates the clarity of treble, smoothness of midrange, and richness of lows, characteristic of Bluebird microphones, all while allowing sound sources to cut through a mix. Further elevating its professional nature is the shockmount, which absorbs vibrations to inhibit handling and stand noise.
Use the 100 Hz low-cut filter to attenuate bass buildup and increase intelligibility, which is especially important when the mic is close to the source. When miking drum kits or guitar amps, the -20 dB pad is perfect for keeping the sound clear and free of distortion. The mic's cardioid polar pattern rejects a good deal of sound behind the mic, allowing it to pick up less room ambience and background noise than many other polar responses. The Bluebird SL can be connected to any XLR mic input that is capable of sending 48V phantom power.
Behind the Mic
With the original Bluebird microphone, Blue set a new standard for modern recording mics. Bluebird SL advances that legacy with refined sonics and versatile switches to capture exceptionally clear and powerful sound that makes ears perk up and listen. Add in an updated design to inspire your best performances, and what you get is a best-selling Essential Series condenser mic.
Inside the Sound
Every component of Bluebird SL is specially designed to deliver crystal-clear tone. The hand-built capsule utilizes a fine, gold-sputtered Mylar diaphragm that delivers superior resonance at higher frequencies to help vocals cut through the mix. The sculpted rear backplate ensures balanced sound across the entire frequency spectrum. Plus, discreet Class-A circuitry maximizes the accuracy of your sound.
Make the Switch
Bluebird SL is a special mic for every kind of performance. The onboard switchable 100 Hz high-pass filter and -20 dB pad give you the flexibility to track a wide variety of sound sources with nuance and power. Use Bluebird SL to capture a singer's unique vocal character in stunning detail, achieve full-frequency guitar recordings, and more.
- Emphasized upper clarity with smooth mid frequencies for voices and instruments
- Hand-built, large-diaphragm cardioid capsule
- Blue's Class-A circuitry delivers rich harmonic audio
- 100 Hz low-cut filter increases clarity and reduces rumble from your room or desk
- -20 dB pad keeps your audio free of distortion
- Operates on 48V phantom power
- Connects to XLR mic inputs
- Suitable for use with home-studio interfaces (USB, Thunderbolt, or otherwise)
- Includes custom shockmount to reduce vibration noise
- Supplied with wooden storage box
Specifications:
- Primary Applications: Studio Recording
- Form Factor: Large Diaphragm Mic / Stand/Boom Mount
- Intended Sound Sources: Vocals, Acoustic Guitar, Electric Guitar, Piano, Drums, Strings
- Sound Field: Mono
- Operating Principle: Pressure Gradient
- Capsule: Condenser
- Polar Pattern: Cardioid
- Orientation: Side Address
- Circuitry: Solid-State
- Pad: -20 dB
- High-Pass Filter: 100 Hz, 12 dB/Octave
- Tone Adjustment: None
- Gain Adjustment: None
- Indicators: None
- On-Board Controls: High-Pass Filter, Pad
- Windscreen: None
- Frequency Range: 20 Hz to 20 kHz
- Maximum SPL: 138 dB SPL (.5% THD)
- Impedance: 50 Ohms
- Load Impedance: ≥ 1000 Ohms
- Sensitivity: 28.5 mV/Pa at 1 kHz
- Dynamic Range: 126.3 dB
- Signal-to-Noise Ratio: 82.3 dB A-Weighted
- Equivalent Noise Level: 11.7 dB
- Output Connectors (Analog): 1 x XLR 3-Pin Male (on Mic)
- Headphone Connector: None
- Bus Power: None
- Operating Voltage: 48 V (Phantom Power)
- Color: Blue
- Mounting: Shockmount (Included)
- Included Case: Hard Case
- Included Filters: None
