Offered here in a nickel finish, the Warm Audio WA-47jr is a large-diaphragm FET condenser microphone designed to provide the tonal characteristics of classic solid-state U47 microphones for vocalists, musicians, and recording engineers in home, project, and commercial recording studios. Thanks to three polar patterns—cardioid, omnidirectional, and figure-8—selectable from a switch on the front of the body, its versatility allows it to excel at anything from dry, close-up vocals to ambient room sounds. A -10 dB pad switch raises the maximum SPL from 147 dB to a high of 157 dB, enabling safe use when miking kick drums and cranked guitar and bass amps. Excessive low frequencies from proximity effect are easily reduced via the high-pass filter, which rolls off lows below 70 Hz.
The K47-style capsule reproduction features dual gold-sputtered, 6-micron Mylar diaphragms with a single backplate. The fully discrete signal path includes Toshiba FETs, WIMA film capacitors, and Panasonic electrolytic capacitors to deliver the clean tone associated with transformerless microphones. With a gold-plated XLR 3-pin connector and operability via 48V phantom power, it is compatible with most mixing consoles and mic preamps. It comes with a vibration-reducing shockmount and a compact hardmount to allow flexibility in placement and positioning.
Specifications:
- Primary Applications: Studio Recording
- Form Factor: Large Diaphragm Mic / Stand/Boom Mount
- Intended Sound Sources: Vocals, Instrument
- Sound Field: Mono
- Operating Principle: Pressure Gradient
- Capsule: Condenser
- Diaphragm: 1.3" / 34 mm
- Polar Pattern: Cardioid, Figure-8, Omnidirectional
- Pattern Selection: Switched (Adjustable on Mic)
- Orientation: Side Address
- Circuitry: Solid-State (FET)
- Pad: -10 dB
- High-Pass Filter: 70 Hz
- Tone Adjustment: None
- Gain Adjustment: None
- Indicators: None
- On-Board Controls: High-Pass Filter, Pad, Polar Pattern
- Windscreen: None
- Frequency Range: 20 Hz to 20 kHz
- Maximum SPL: 147 dB SPL (1 kHz, .5% THD, 1-Kilohm Load), 157 dB SPL (1 kHz, .5% THD, 1-Kilohm Load, with Pad)
- Impedance: 100 Ohms
- Load Impedance: ≥ 1000 Ohms
- Sensitivity: -40 dB
- Dynamic Range: 138 dB A-Weighted
- Signal-to-Noise Ratio: 85 dB A-Weighted
- Equivalent Noise Level: 9 dB A-Weighted
- Output Connectors (Analog): 1 x XLR 3-Pin Male (on Mic)
- Headphone Connector: None
- Operating Voltage: 48 V (Phantom Power)
- Color: Nickel
- Mounting: Mic Clip/Stand Adapter, Shockmount (Included)
- Mounting Thread Size: 5/8"-27 Female (3/8"-16 Female with Included Adapter)
- Included Case: Zipper Pouch
- Included Filters: None
- Dimensions: ø: 2 x L: 8.3" / ø: 5.2 x L: 21 cm
- Weight: 1.1 lb / 0.5 kg
- Package Weight: 3.83 lb
- Box Dimensions (LxWxH): 11.15 x 10 x 6.2"